服务热线:400-6688-603
当前位置:首页 - 新闻动态 >

大型的喷绘膜广告在拼接时要注意什么?

来源:http://www.sdjndsl.com  日期:2019-06-27

有很多的客户在定做喷绘膜广告时,由于篇幅太大,后期就不得不需要拼接工艺,下面山东喷绘膜广告公司就给大家讲一讲大型的喷绘膜广告在拼接时要注意的事项!
There are many customers in customized spray film advertising, because the space is too large, the later stage has to need splicing technology, the following Shandong spray film advertising company will tell you about the large-scale spray film advertising in splicing matters to pay attention to!
拼接:当客户要求的画面大过喷绘机的大喷绘幅面时,我们会将画面分开输出,然后再拼接在一起,在做这种拼接的工作时,画面的设计制作和输出是其前提,因此每一步都不应该有误。
Stitching: When the picture required by customers is larger than the maximum size of the spraying machine, we will output the picture separately, and then stitch together. When doing this kind of stitching, the design, production and output of the picture is the premise, so every step should not be wrong.
首先画面的拼接位置要弄清楚,倒底是谁在上面,谁在底下,哪张会更大一些,哪张会更小一些。在输出过程中,因为要输出的画面是同一张图,因此务必保持其色彩一致和大小相应(比如说宽一定),要记录输出时的设置参改,确保无误。
First of all, the splicing position of the picture should be clear, who is on the bottom, who is on the bottom, which one will be larger, which one will be smaller. In the process of output, because the picture to be output is the same picture, it is necessary to keep its color uniformity and size corresponding (for example, a certain width), to record the settings of output changes, to ensure that there is no error.
山东喷绘膜广告
在进行拼接的过程中,首先将两幅画要相接的一端整齐。然后在一个足够的平面上将画面展板,按正确的相对位置,把画面放好,用胶条固定。掀起上展画南相接部位的前端,喷胶(要遮住画面不被喷胶)之后用刮板由中间向两边将画面压实贴紧。翻起上层画面的另一端,在下层画面的相接部分喷胶,压实,即可将画面接了。
In the process of stitching, first of all, the two pictures should be neatly connected at one end. Then, on a sufficient plane, the picture display board is placed in the correct relative position and fixed with tape. Raise the front end of the southern part of the upper exhibition, spray glue (to cover the picture without being sprayed) and then press the picture tightly from the middle to both sides with a scraper. Turn up the other end of the upper picture, spray glue on the adjacent part of the lower picture, compact, and then connect the picture.
拼接好的画面一定不可垂直接缝卷起,这样很易在相接处产生皱褶,这点应注意!
The spliced picture must not be rolled up by vertical seams, so it is easy to produce wrinkles at the joints, which should be noted!
今天的精彩内容就暂且和大家介绍到这里了,如果大家还有其他想要了解的地方,欢迎大家到我们山东喷绘膜广告公司的官网给我们留言评论:http://www.sdjndsl.com,或者直接拨打我们的咨询热线,我们将给您一个满意的答复!
Today's wonderful content will be introduced here for the time being. If you have other places you want to know, you are welcome to leave a comment on our website of Shandong Spray-painted Film Advertising Company: http://www.sdjndsl.com, or call our hotline directly. We will give you a satisfactory answer!
上一篇:为何墙体广告的市场爆破效果如此显著?
下一篇:墙体广告想要从众多告渠道中脱颖而出需要怎么做?